Characterization of eco-cement paste produced from waste sludges

In this study, marble sludge, sewage sludge, drinking water treatment plant sludge, and basic oxygen furnace sludge were used as replacements for limestone, sand, clay, and iron slag, respectively, as the raw materials for the production of cement in order to produce eco-cement. It was found that it is feasible to use marble sludge to replace up to 50% of the limestone and also that other materials can serve as total replacements for the raw materials typically used in the production of cement. The major components of Portland cement were all found in eco-cement clinkers. The eco-cement was confirmed to produce calcium hydroxide and calcium silicate hydrates during the hydration process, increasing densification with the curing age. The compressive strength (S_c) and microstructural evaluations conducted at 28 d revealed the usefulness of eco-cement. It was observed that the S_c data correlated linearly with the pore volume (P) data at 28 d. The proposed model equation could be represented as S_c = 178-461P (correlation coefficient, R² = 0.96). Two parameters, the large capillary pore volume and the medium capillary pore volume, were evaluated using multiple regression analysis.     

Stabilization of residues obtained from the treatment of laboratory waste: Part 2--transformation of plasma vitrified slag into composites

The Sustainable Environment Research Center of National Cheng Kung University in Taiwan has set up a treatment plant to dispose of laboratory waste. In the treatment process, the residue from the incineration system and the physical and chemical system is vitrified by a plasma melting system. Part 1 of this study described the treatment path of metals during vitrification. In Part 2, plasma vitrified slag is reused by using a molding technology. Unsaturated polyester resin and glass fiber were used as the molding material and additive, respectively, in the molding process. With an appropriate mixing ratio of unsaturated polyester resin, glass fiber, and slag, the physical properties of composites improved, and the ultimate tensile strength reached 17.6 MPa. However, an excess amount of slag reduced the strength and even retarded the production of composites. Differential thermal analysis and the water bathing test results show that the composite decomposed at 80 degrees C and that it vaporized at 187 degrees C. Although the unsaturated polyester resin decomposed, the metal encapsulated in the slag did not leach out. The results show that the reuse of slag using molding technology should be taken into consideration.     

Preliminary investigation of greenhouse gas emissions from the environmental sector in Taiwan

The United Nations Framework Conventions on Climate Change (UNFCCC) asks their Parties to submit a National Inventory Report (NIR) for greenhouse gas (GHG) emissions on an annual basis. However, when many countries are quickly growing their economy, resulting in substantial GHG emissions, their inventory reporting systems either have not been established or been able to be linked to planning of mitigation measures at national administration levels. The present research was aimed to quantify the GHG emissions from an environmental sector in Taiwan and also to establish a linkage between the developed inventories and development of mitigation plans. The "environmental sector" consists of public service under jurisdiction of the Taiwan Environmental Protection Administration: landfilling, composting, waste transportation, wastewater treatment, night soil treatment, and solid waste incineration. The preliminary results were compared with that of the United States, Germany, Japan, United Kingdom, and Korea, considering the gaps in the scopes of the sectors. The GHG emissions from the Taiwanese environmental sector were mostly estimated by following the default methodology in the Intergovernmental Panel on Climate Change guideline, except that of night soil treatment and waste transportation that were modified or newly developed. The GHG emissions from the environmental sectors in 2004 were 10,225 kilotons of CO2 equivalent (kt CO2 Eq.). Landfilling (48.86%), solid waste incineration (27%), and wastewater treatment (21.5%) were the major contributors. Methane was the most significant GHG (70.6%), followed by carbon dioxide (27.8%) and nitrous oxide (1.6%). In summary, the GHG emissions estimated for the environmental sector in Taiwan provided reasonable preliminary results that were consistent and comparable with the existing authorized data. On the basis of the inventory results and the comparisons with the other countries, recommendations of mitigation plans were made, including wastewater and solid waste recycling, methane recovery for energy, and waste reduction/sorting.     

Prenatal diagnosis of Hb H disease due to compound heterozygosity for South-East Asian deletion and Hb constant spring by polymerase chain reaction

A pregnant woman has two children affected by moderately severe Hb H disease due to compound heterozygosity of South-east Asian deletion and Constant Spring mutation. In her third pregnancy, transabdominal chorionic villus sampling was performed at the tenth gestational week to obtain fetal DNA. The polymerase chain reaction was used for detection of both the South-east Asian deletion and the Constant Spring mutation. Hb H disease was diagnosed in the fetus. After genetic counselling, the couple elected to have the pregnancy terminated.     

Bioaccumulation of arsenic compounds in aquacultural clams (Meretrix lusoria) and assessment of potential carcinogenic risks to human health by ingestion

This study surveyed the total arsenic (As) and As species contents in clams (Meretrix lusoria) farmed in areas of hyperendemic blackfoot disease (BFD) in southwestern Taiwan. Total As and As species in sediment and pond water were also analyzed to examine the bioaccumulation of As in clams in their exposure environment. Moreover, potential carcinogenic risks associated with the ingestion of As in aquacultural clams were evaluated probabilistically. The average total As contents in medium-sized and small clams were 7.62 and 10.71 microg/g (dry wt), respectively. The content of the As species in this study was approximately 61% of the total As content. The other unquantified As species are possibly arsenocholine, arsenosugar and arsenolipid. The average ratios of inorganic As contents to total As contents in clams ranged from 12.3% to 14.0% which are much higher than that found in the farmed oyster (Crassostrea gigas), indicating that humans may expose to larger quantities of inorganic As by ingesting the same amount of clam as oyster. Using different ingestion rates derived by the average consumption method and the questionnaire method, the estimated risks to human health associated with consuming clams from the BFD area ranging from slightly to largely exceed the standard target risk. Based on the estimation of the TR model, a 0.18g/day-person of the safe ingestion rate of clams in the BFD region is recommended.     

A Feasibility Study on the Predictive Emission Monitoring System Applied to the Hsinta Power Plant of Taiwan Power Company

Abstract

The continuous emission monitoring system (CEMS) can monitor flue gas emissions continuously and instantaneously. However, it has the disadvantages of enormous cost, easily producing errors in sampling periods of bad weather, lagging response in variable ambient environments, and missing data in daily zero and span tests and maintenance. The concept of a predictive emission monitoring system (PEMS) is to use the operating parameters of combustion equipment through thermodynamic or statistical methods to construct a mathematic model that can predict emissions by a computer program. The goal of this study is to set up a PEMS in a gas-fired combined cycle power generation unit at the Hsinta station of Taiwan Power Co. The emissions to be monitored include nitrogen oxides (NO_x) and oxygen (O₂) in flue gas. The major variables of the predictive model were determined based on the combustion theory. The data of these variables then were analyzed to establish a regression model. From the regression results, the influences of these variables are discussed and the predicted values are compared with the CEMS data for accuracy. In addition, according to the cost information, the capital and operation and maintenance costs for a PEMS can be much lower than those for a CEMS.     

Evaluating the potential of CNT-supported Co catalyst used for gas pollution removal in the incineration flue gas

This study investigated the use of Cu/Al₂O₃, Co/Al₂O₃, Fe/Al₂O₃, and Ni/Al₂O₃ catalysts for the growth of carbon nanotubes (CNTs). These CNTs were used as support for Co catalyst preparation and Co/CNT catalysts were applied to a catalytic reaction to remove BTEX, PAHs, SO₂, NO, and CO simultaneously in a pilot-scale incineration system. The analyzed results of EDS and XRD showed low metal content and good dispersion characteristics of the Al₂O₃-supported catalysts by excess-solution impregnation. FESEM analyzed results showed that the CNTs that were synthesized from Co, Fe, and Ni catalysts had a diameter of 20 nm, whereas those synthesized from Cu/Al₂O₃ had a diameter of 50 nm. Pilot-scale test results demonstrated that the Co/CNT catalyst effectively removed air pollutants in the catalytic reaction and that there was no obvious deactivation by Pb, water vapor, and coke deposited in the process. The thermal stabilization at 250 °C and hydrophobicity properties of CNTs enhanced the application of CNT catalysts in flue gas.     

Environmental Exposure Assessment for Emergency Response in a Nuclear Power Plant Using an Integrated Source Term and 3D Numerical Model

Nuclear power plants are normally assumed to be safe when their radiation impact in all operational states is kept at a reasonably low level. However, accidentally released radioactive substances and ionizing radiation may lead to a situation that cannot maintain the regulatory prescribed dose limits for internal and external exposure of the personnel and population. Nuclear emergency preparedness and response in nuclear or radiological events have been of concern recently in international communities. Nuclear power plants may need to provide essential information regarding possible scenarios of accidental releases that might have short-term detrimental effects and long-term risks in nearby populated regions. This paper presents a synergistic integration of a source term model and a three-dimensional, time-dependent, numerical model (i.e., HOTMAC/RAPTAD), which was applied to simulate a specific scenario in which a vapor cloud was accidentally released from Maanshan (i.e., the third nuclear power plant) in South Taiwan. It aims at dealing with middle-range risk assessment for nuclear emergency preparedness and response. The solutions of such an integrated modeling platform can be found with numerical analyses that describe the processes of radionuclide generation, transport, decay, and deposition, giving the final risk assessment in a neighboring coastal city—Kaohsiung, South Taiwan. In addition, sensitivity analyses were performed to evaluate the internal consistency of model parameters, which further support the application potentials. Such a modeling technique is valuable because it can characterize the fate and transport of radioactive nuclides over the long term. The case study in South Taiwan uniquely demonstrates the feasibility and significance of such model integration.     

Analysis of business safety performance by structural equation models

Domestic safety performance, which has had gained increasingly greater importance in recent years, is the subject of many studies. However, studies on the application of the structural equation model (SEM) in systematic safety performance model fitness verifications remain scarce. The purpose of this study was to evaluate the safety performance with the aim at one private representative chemical and food company in Taiwan, for providing the strategy and improvement consult in safety management. In order to obtain the best-fit safety performance model, the Amos 17.0 (Analysis of Moment Structure 17.0) was used to construct a series of SEM competition models to confirm the four various orientations of the safety performance model through the confirmatory factor analysis (CFA) method. The results showed that the first-order multi-factor oblique model and second-order single-factor safety performance model were the best-fit models. The results of this study will contribute to the related enterprises’ ability to assess the safety indicators and will also be an even greater contribution to the future development of enterprise security.     

A Marine Pollution Study of Northeast Coastal Water Off Taiwan Island

Abstract

The coastal water of northeast Taiwan island, called ‘Yin-Yang Hai’ for its distinct yellow colour compared with blue offshore water, was investigated from 1989 to 1990 by the authors. Biological study showed the dominant species of plankton to be Copepoda, Cladocera, planktonic eggs and Diatoma. Dominant species of benthos were young crabs, Amphipoda and Annelida, with Amphipoda usually occurring in heavily polluted areas. Heavy metal data showed that the concentration of copper was high. the copper and iron concentration in algae of the intertidal zone was also high. the concentrations of iron and copper in inshore water were also higher than in offshore water. By comparison of the pH and salinity distribution of this area, we conclude that this coastal water has been polluted by acid waste water from coastal industry. the suspended solids concentration in sea water is high. Flocculation occurring at the boundary of fresh and saline water might be a reason for the distinct yellow colour of the water of this area. Further study is required.